Miniature fast charger with balancer for charging 1-16 pcs. NiCd/NiMH, 1–6 pcs. LiPo/Li-Ion/LiFe/LiHV/ULiHV, 2-24V Pb batteries with a current of 0.1-16 A (max. 350 W). Discharge with a current of 0.1-1.0 A (max. 10 W). The charger can be supplied with a voltage of 10-30 V (DC). Internal resistance measurement, USB type C port for updating, compatible with Smart battery modules to work with BattAir / ISD Link applications.
The iSDT Q6 Retro 350W miniature charger is an intelligent charger with power supply from a car battery or a stabilized mains supply and very simple and clear operation. Q6 Retro allows you to charge and discharge common types of cells (NiCd, NiMH, LiPo, LiHV, ULiHV, Li-Ion, LiFe, Pb), in addition, it is equipped with a built-in six-channel balancer that ensures safe charging of lithium batteries. The charger is equipped with a color LCD display and a programming wheel/button.
The charger is equipped with an XT60 output socket and a universal socket for JST-XH service connectors, allowing direct connection of battery power cables and JST-XH service connectors of 2S-6S sets. If you use sets with XT60 and JST-XH connectors, you can do without charging cables and adapters. You can use standard Sky RC or RC System adapters to connect the service connectors of other systems.
In addition to miniature dimensions with high performance and intuitive operation, it is worth special mention:
- a program for new types of "high-voltage" lithium batteries LiHV with a terminal voltage for charging up to 4.35 V and ULiHV with a terminal voltage of 4.45 V;
- adjustable terminal voltage for charging and discharging for lithium batteries (allows gentler charging, which aviators like, or, on the contrary, brutal overcharging, which is adored by "car enthusiasts");
- adjustable terminal voltage of 2.00-2.45 V enables charging of all types of lead-acid batteries;
- powerful balancer with a current of up to 1.5 A;
- the ability to communicate and start charging/discharging without the need to set up the charger in cooperation with iSDT Smart modules for batteries (they store battery data and preset parameters for charging with the help of the BattAir application) connected to the charger; the charger can work independently with a battery with a preset Smart module or under the "supervision" of a smartphone with BattAir and ISD Link applications (Android and iOS).
Overview of basic functions and parameters:
- power supply 10-30 V DC (XT60 socket),; to fully utilize the power of the charger, the supply voltage should be at least 24 V;
- adjustable charging current 0.1-16.0 A (max. 350 W);
- adjustable discharge current 0.1-1.0 A (max. 10 W);
- termination of charging using automatic delta-peak for NiCd and NiMH accumulators;
- lithium and Pb accumulators are charged by the "constant current / constant voltage" method;
- adjustable delta-peak detection sensitivity for NiCd and NiMH batteries;
- adjustable charging terminal voltage for lithium and lead-acid batteries;
- three modes for lithium batteries – charge, discharge and storage charge/discharge; all this with or without a balancer;
disposal discharge mode for safe discharge of the discarded battery before it is handed over for recycling;
- the charger can work as a stabilized source with an adjustable voltage of 5-30 V and a current of 0.5-10.0 A;
- easy firmware update via USB-C port and ISD Go PC utility;
- backlit color LCD display with a simple, clear menu and display of parameters during charging/discharging;
- programming wheel/button for easy and clear setting and control of the charger;
- a number of warning messages contribute to safe operation – incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect output polarity, etc.;
- fan for forced cooling;
- compact plastic box, small dimensions.
Package contents
The package includes the iSDT Q6 Retro charger and instructions.
