Brutally powerful and the largest RC car model from Traxxas, which combines the best. Whether you're riding on gravel, rough terrain, or tall grass, the X-Maxx 8S handles everything with ease thanks to its size and extreme power. It is assisted by top electronics and the VXL-8S drive, with which the RC model reaches a speed of up to 80 km/h. Newly features Sledgehammer tires with an integrated belt for increased durability.
The Traxxas X-Maxx is designed for the ultimate driving experience without compromise. It has a high ground clearance, wide wheel track and top components for extreme performance. The chassis is nylon with a modular construction and integrated shock mounts, which ensures high impact resistance. The all-metal drivetrain consists of a "Cush Drive" shock absorber, front, center and rear differentials, an aluminum center shaft, steel half-axles and dual-bearing wheel hubs.
The model is powered by a VXL-8S controller and a powerful Velineon 1200XL AC motor. The Traxxas TQi programmable transmitter can be equipped with a Bluetooth module (sold separately) to connect the model to a mobile phone and display telemetry data such as driving speed or engine speed.
For convenient model preparation , the body is clipless, with easy assembly and disassembly. The batteries are secured in the compartments by a partition with a latch. It is a responsive, fast and convenient battery replacement system.
Revolutionary chassis
The chassis of the Traxxas X-Maxx RC car is made of a composite molding, which, thanks to its spatial concept, is very rigid and at the same time light. As with other Traxxas RC cars, the chassis is modular, meaning it consists of a center section, a front section, and a rear section.
Modular design
The modular design allows the entire front and back to be removed. In a few minutes you have full access to easy service and model settings. The modularity of the car chassis simplifies maintenance, it is easy to get to differentials, etc. In addition, in case of very severe accidents, you do not have to change the entire chassis of the model, but only the damaged part.
Shock absorbers
The massive X-Maxxu GTX shock absorbers have piston rods with a diameter of 5.2 mm, they are made of high-strength steel. Attachment of shock absorbers to the arms and the tower is dual. All pins are made of 4 mm steel! The well-dimensioned three-dimensional towers of shock absorbers allow driving even in very difficult terrain.
Sharp steering
The Dual-Bellcrank steering system ensures quick and precise steering response. The cam servo saver is located in the upper part of the column and protects the steering from impacts.
Engine mount and radiator
Four bolts with a locking pin firmly hold the motor in place and define the exact gap between the teeth at a given gear ratio. The engine is equipped with a radiator with a fan to maintain the correct operating temperature even under full load.
Compartments for batteries
The Traxxas X-Maxx 8S remote control car model includes two compartments on the sides of the chassis to accommodate two LiPol 4S batteries. The position at the bottom of the compartments keeps the center of gravity low.
Sledgehammer tires
High off-road traction
The proven Sledgehammer tread pattern provides maximum traction on a variety of surfaces, especially rough terrain, gravel and grass.
Durability and stability
X-Maxx Sledgehammer® tires feature a lightweight tread in the carcass that prevents bulging at high speeds for rock-solid confidence and stability.
Cush drive absorption system
The innovative Cush drive system uses a special part equipped with elastomer silent blocks to absorb the shock of the engine. The system replaces the friction clutch and enables a more efficient and reliable drive without complex adjustments.
Differentials
To distribute the power of the 4x4 drive, the model is equipped with a front, central and rear differential. The center differential uses a very thick 20M cSt oil to use full power without slipping under lightning acceleration. The axle differentials are fitted with four metal gears for durability and long life.
Center drive shaft
The transmission of power between the axles is realized by an aluminum central drive shaft with splines. Innovative sealing keeps dust and dirt out of the center tunnel.
Steel axles
Robust steel drive shafts with splined output from the differential safely transfer the full power of the engine to the wheels. Thanks to the parallel joint design (CV), the shafts have a smooth operation in every suspension position.
Hubs with bearings
The blocks contain large encapsulated ball bearings for smooth running and long-lasting performance.
Body
A revolutionary novelty is the new X-Maxx car body fixing system. The body is not fastened with clips, but with a special clip. This eliminates unsightly body mounts, removing the body is now a matter of seconds.
Power steering
Control is implemented using a robust, digital Traxxas servo - TRA2085. The maxi size servo has a moment of 26 kg.cm, a speed of 0.16 s/60°. Nylon gears. Double ball bearing on the milled shaft, for precise operation. Waterproof* construction. Effective cooling of the servo is provided by a central cooler.
Powerful Velineon 1200XL AC motor
The powerful, AC sensorless Velineon 1200XL motor provides, thanks to the 4-pole design, very smooth operation. Excellent heat dissipation is ensured by the metal body of the motor. Gold plated 6.5mm connectors, 1275kV and 5mm output shaft.
VXL-8S controller
The RC car model is equipped with a specially tuned VXL-8S electronic AC controller. Input voltage 4, 6 or 8 LiPo cells (max. 33.6 V). Simple one-button setup. Status indication by LEDs. Heat dissipation using a massive cooler and fan. Water-resistant* construction. Gold-plated connectors 6.5mm. 2-stage low voltage detection of LiPol batteries, thermal protection and overvoltage protection.
3 driving modes:
- Sports mode - Forward / Brake / Reverse
- Racing Mode - Forward / Brake
- Training mode - 50% Forward / Brake / 50% Reverse
The regulator is equipped with a port for connecting original accessories, for example LED lighting.
Traxxas TQi receiver
RC receiver Traxxas TQi 5 channel. TSM with telemetry for Traxxas TQi transmitters. Simple operation, pairing with a button. LED status indication. 3-axis MEMS sensors are integrated in the receiver for learning the position of the receiver.
The 5-channel receiver is also equipped with two connectors for connecting telemetry sensors RPM (revolutions) and V/T (voltage / temperature).
Furthermore, a telemetry expansion module can be connected to the 4-pin connector, into which you can connect up to 6 more sensors, including a very accurate GPS speed sensor.
Traxxas TQi RC kit with Bluetooth ready
Traxxas has prepared for you a completely new series of two-channel RC kits with Bluetooth connectivity. The Bluetooth module (sold separately) will allow you to connect the RC model with the clear graphic application Traxxas Link, which you can install for free on your smartphone.
The Traxxas Link app for Apple devices is available for free on the AppStore , the app for Google Android devices is free on GooglePlay .
The Traxxas Link App is a powerful application that gives you complete control over the operation and tuning of your Traxxas RC model with stunning visualization and absolute accuracy of settings. Traxxas Link can display telemetry data that the model provides in real time, such as speed, rpm, temperature, battery voltage and model roll. (Telemetry provided varies by specific model type). You can share settings of RC models, you can create any number of profiles for a specific track or users, e.g. children. All in the app with the brilliant graphics that come naturally from Traxxas.
Telemetry options vary by model. It may be necessary to install telemetry sensors to obtain telemetry data. Compatible telemetry parts with this model can be found in the "Accessories - Telemetry" section. More information on telemetry installation here.
Real-time telemetry
An exclusive controller with advanced electronics is equipped for real-time telemetry measurement. Using a wireless Bluetooth module (sold separately) and the Traxxas link app, it is possible to monitor speed, engine speed and battery voltage in real time on your phone. The controller provides telemetry data and no additional sensors are required.
Traxxas Stability Management
The Traxxas Stability Management (TSM) stability system allows you to experience not only power, speed, acceleration and cornering at extreme speed, but also guarantees much easier steering and control on slippery surfaces such as dust, smooth concrete or even ice and snow.
The receiver has a MEMS 3-axis gyro and an accelerometer, which evaluates the movement of the model on the order of 100 times per second and corrects the model's direction of travel by appropriate interventions in the steering of the front wheels. Traxxas TSM does not limit engine power - you have 100% control over engine power. Algorithms are tuned for each model separately. The level of assistance is set using the multi-function controller on the transmitter or possibly in the Traxxas Link application.
Automatic turned on wheels
The Self-righting function is activated remotely via the transmitter, by suddenly adding gas and braking, the model gradually swings and turns back onto its wheels.
The feature is ineffective when using fully charged 4S LiPo batteries.
Features of the Traxxas X-Maxx RC model car
- The X-Maxx-8S is the biggest and most powerful Monster Truck from Traxxas
- X-Maxx-8S reaches a speed of up to 80 km/h (when powered by 2x 4-cell LiPo)
- Lots of innovative model features such as revolutionary car body mounts, engine mounts, massive aluminum wheel axles, lightweight but at the same time strong spatial composite times
- The car's powerful drive system consists of a Velineon 1200XL engine and a VXL-8S controller
- Giant tires with a diameter of 20 cm
- Steel CVD half axles of the model's wheel drive
- New massive Traxxas GTX adjustable oil shocks with 5.2mm piston rods for precise off-road riding
- Latest Traxxas TQi RC Kit
- RC receiver with Traxxas TSM stabilization
- The waterproof* servo steering has a torque of 26 kg/cm, a speed of 0.16 s/60° and is equipped with a heatsink that effectively removes heat from the electronics
- News:
- SledgeHammer tires with integrated belt
- Optimized gear ratio for performance and long life
- Overdrive Gears - TRA7886
- Gear ratio 15/54
- Optional 17/46 transmission included
* Refer to the user manual for information on the water resistance specification. You can find tips and tricks for operating in wet conditions in the blog.
Package contents
The package includes a completely assembled Traxxas X-Maxx 8S Belted 1:5 RC model car with installed components: Velineon 1200XL AC motor, VXL-8S AC controller, 2085 servo control, Traxxas TQi TSM RC receiver. Traxxas TQi Dual Channel RC Transmitter. Accessories: optional gear, 25 mm thickness spacers for batteries, wheel wrench, Allen key (2.5 mm - L, 2.5 mm - T, 2 mm - L). CZ instructions and EN, DE, FR, SP manual.
